How do I install my wifi booster?

Based on the pictures below, you can easily find out what type of modem is installed in your home.

• B-box 3:
  
  Do you have a B-box 3? Click on the ‘B-box 3’ tab above for more information about how to install your Wi-Fi Booster.
  
  
• Internet Box:
  
  Do you have an Internet Box? Click on the ‘Internet Box’ tab above for more information about how to install your Wi-Fi Booster.
• Internet Box+:
  
         
  Do you have an Internet Box+? Click on the ‘Internet Box+’ tab above for more information about how to install your Wi-Fi Booster+.

1. Make sure your Wi-Fi connection is activated: check the button on the back of the Wi-Fi Booster. The button should be set to AUTO.

 

2. Turn on the Wi-Fi Booster:

• Plug the power cord of the Wi-Fi Booster into an electrical outlet in the same room as the B-box.
• Press the POWER button. The light will illuminate green. Wait for 1 minute until the WPS light turns off.

 

3. Synchronize the Wi-Fi of the B-box with the Wi-Fi booster:

• Press on the WPS button of your B-box for 2 seconds. The WPS light flashes.

• Then, within 2 minutes, briefly press the WPS button on the Wi-Fi booster.
  The lights of the 2 devices will blink and go out after a while.

 

• When synchronization is complete, the light will remain on.

 

• You can now pull out the Wi-Fi booster and place it in a central spot between the B-box3 and the device that needs to receive the Wi-Fi signal.

 

4. Turn the Wi-Fi booster back on:

• Plug the power cable into a wall outlet. Be sure to check that the power button is properly pressed.
• The POWER and Link Quality lights illuminate green.
• Check if the Link Quality light stays green. If not, place the wifi booster closer to the B-box.

 

1. Turn on the Wi-Fi booster:

• Plug the Wi-Fi booster's power cable into a wall outlet in the same room where the internet box is located.
• Press the power button. The light will illuminate orange or white.
  
  

 

2. Synchronize the Wi-Fi of the Internet Box with the wifi booster:

• Briefly press the WPS button of your Internet Box. The Wi-Fi light now lights up white.
  
  

• Press the WPS button until the positioning light starts blinking white. This can take up to 10 seconds.
• When synchronization is complete, the positioning light will light green. The Wi-Fi and power lights are now blue.
  
  

• You can now pull out the Wi-Fi booster and place it in a central location between the Internet Box and the device that needs to receive the Wi-Fi signal.

 

3. Turn the Wi-Fi Booster back on:

• Plug the power cable into a wall outlet. Be sure to check that the power button is properly pressed.

 

• The Wi-Fi and POWER lights will light up blue. The Positioning light illuminates green.
• The positioning light doesn’t light up green? Then move the Wi-Fi booster closer to the Internet Box for better reception.
  
  

1. Turn on the Wi-Fi booster:

• Plug the Wi-Fi booster's power cable into a wall outlet in the same room where the Internet Box+ is located.
• Press the POWER button. The light will illuminate orange or white.
  
  

 

2. Synchronize the Wi-Fi of the Internet Box+ with the Wi-Fi Booster+ :

• Briefly press the WPS button of your Internet Box. The Wi-Fi light now blinks white.

 

• Press the WPS button until the positioning light starts blinking white. This can take up to 10 seconds.
  
  

 

• When synchronization is complete, the positioning light will light green. The POWER light is now blue. This can take a few minutes.
  
  

 

• You can now pull out the Wi-Fi Booster+ and place it in a central location between the Internet Box+ and the device that needs to receive the Wi-Fi signal.

 

3. Turn the Wi-Fi Booster back on:

• Plug the power cable into a wall outlet, be sure to check that the power button is properly pressed.
  
  

• The Wi-Fi and POWER lights will light up blue. The Positioning light illuminates green.
• The positioning light doesn’t light up green? Then move the Wi-Fi Booster+ closer to the Internet Box+ for better reception.