How do I install my Wi-Fi booster?
What type of modem do I have?
B-box 3
Internet Box
Based on the pictures below, you can easily find out what type of modem is installed in your home.
- B-box 3:
Do you have a B-box 3? Click on the ‘B-box 3’ tab above for more information about how to install your Wi-Fi booster. - Internet Box:
Do you have an Internet Box? Click on the ‘Internet Box’ tab above for more information about how to install your Wi-Fi booster.
- Make sure your Wi-Fi connection is activated.
- Check the button on the back of the Wi-Fi Booster. The button should be set to AUTO.
- Turn on the Wi-Fi Booster. Plug the power cord of the Wi-Fi booster into an electrical outlet in the same room as the B-box.
- Press the POWER button. The light will illuminate green. Wait for 1 minute until the WPS light turns off.
- Synchronize the Wi-Fi of the B-box with the Wi-Fi booster. Press on the WPS button of your B-box for 2 seconds. The sync light (WPS) flashes.
- Then, within 2 minutes, briefly press the WPS button on the Wi-Fi booster.
The lights of the 2 devices will blink and go out after a while.
- When synchronization is complete, the light will remain on.
- You can now pull out the Wi-Fi booster and place it in a central spot between the B-box3 and the device that needs to receive the Wi-Fi signal.
- Turn the Wi-Fi booster back on and plug the power cable into a wall outlet. Be sure to check that the power button is properly pressed.
- Turn on the Wi-Fi booster.
- Plug the Wi-Fi booster's power cable into a wall outlet in the same room where the internet box is located. Press the power button. The light will illuminate orange or white.
- Synchronize the Wi-Fi of the Internet Box with the wifi booster. You do this by briefly pressing the WPS button of your Internet Box. The wifi light now lights up white.
- Press the WPS button until the positioning light starts blinking white. This can take up to 10 seconds. When synchronization is complete, the positioning light will light green. The Wi-Fi button and power button are now blue.
- You can now pull out the Wi-Fi booster and place it in a central location between the Internet Box and the device that needs to receive the Wi-Fi signal. Turn the Wi-Fi booster back on and plug the power cable into a wall outlet. Be sure to check that the power button is properly pressed.
- Does the positioning light not light up green? Then move the Wi-Fi booster closer to the Internet Box for better reception.