How do I install my Wi-Fi booster?

What type of modem do I have?
B-box 3
Internet Box
Internet Box+

To provide you with the right installation guide, we need to know what type of modem you're using. This way, we can ensure everything goes smoothly! Based on the pictures below, you can easily find out what type of modem is installed in your home.

 

  • B-box 3:
    BBOX_3V%2B_3-4_DROITE.png
    Do you have a B-box 3? Click on the ‘B-box 3’ tab above for more information about how to install your Wi-Fi Booster.

     
  • Internet Box:
    5-4.png
    Do you have an Internet Box? Click on the ‘Internet Box’ tab above for more information about how to install your Wi-Fi Booster.
  • Internet Box+:

           
    Do you have an Internet Box+? Click on the ‘Internet Box+’ tab above for more information about how to install your Wi-Fi Booster+.

1. Make sure your Wi-Fi connection is activated: check the button on the back of the Wi-Fi Booster. The button should be set to AUTO.

Screenshot_2023-04-28_4.16.27_PM.png

 

2. Turn on the Wi-Fi Booster:

  • Plug the power cord of the Wi-Fi Booster into an electrical outlet in the same room as the B-box.
  • Press the POWER button. The light will illuminate green. Wait for 1 minute until the WPS light turns off.

 

3. Synchronize the Wi-Fi of the B-box with the Wi-Fi booster:

  • Press on the WPS button of your B-box for 2 seconds. The WPS light flashes.



 

  • Then, within 2 minutes, briefly press the WPS button on the Wi-Fi booster.
    The lights of the 2 devices will blink and go out after a while.

 

  • When synchronization is complete, the light will remain on.

 

  • You can now pull out the Wi-Fi booster and place it in a central spot between the B-box3 and the device that needs to receive the Wi-Fi signal.

 

4. Turn the Wi-Fi booster back on:

  • Plug the power cable into a wall outlet. Be sure to check that the power button is properly pressed.
  • The POWER and Link Quality lights illuminate green.
  • Check if the Link Quality light stays green. If not, place the wifi booster closer to the B-box.

 

1. Turn on the Wi-Fi booster:

  • Plug the Wi-Fi booster's power cable into a wall outlet in the same room where the internet box is located.
  • Press the power button. The light will illuminate orange or white.

     

wifi1.png

 

2. Synchronize the Wi-Fi of the Internet Box with the wifi booster:

  • Briefly press the WPS button of your Internet Box. The Wi-Fi light now lights up white. 

     

wifi2.png

 

  • Press the WPS button until the positioning light starts blinking white. This can take up to 10 seconds.
  • When synchronization is complete, the positioning light will light green. The Wi-Fi and power lights are now blue.

     

wifi3.png

wifi4.png

 

  • You can now pull out the Wi-Fi booster and place it in a central location between the Internet Box and the device that needs to receive the Wi-Fi signal.

 

3. Turn the Wi-Fi Booster back on:

  • Plug the power cable into a wall outlet. Be sure to check that the power button is properly pressed.

wifi5.png

 

  • The Wi-Fi and POWER lights will light up blue. The Positioning light illuminates green.
  • The positioning light doesn’t light up green? Then move the Wi-Fi booster closer to the Internet Box for better reception.

     

wifi6.png

1. Turn on the Wi-Fi booster:

  • Plug the Wi-Fi booster's power cable into a wall outlet in the same room where the Internet Box+ is located.
  • Press the POWER button. The light will illuminate orange or white.

     

 

2. Synchronize the Wi-Fi of the Internet Box+ with the Wi-Fi Booster+ :

  • Briefly press the WPS button of your Internet Box. The Wi-Fi light now blinks white.


 

  • Press the WPS button until the positioning light starts blinking white. This can take up to 10 seconds.

     

 

  • When synchronization is complete, the positioning light will light green. The POWER light is now blue. This can take a few minutes.

     

 

  • You can now pull out the Wi-Fi Booster+ and place it in a central location between the Internet Box+ and the device that needs to receive the Wi-Fi signal.

 

3. Turn the Wi-Fi Booster back on:

  • Plug the power cable into a wall outlet, be sure to check that the power button is properly pressed.

     



 

  • The Wi-Fi and POWER lights will light up blue. The Positioning light illuminates green.
  • The positioning light doesn’t light up green? Then move the Wi-Fi Booster+ closer to the Internet Box+ for better reception.


     

 

 

 

Was this article helpful?
155 out of 367 found this helpful

Related articles